Skip to content
BRIDGE BRIDGE Diaspora BRIDGE

Courses with Gaps

BRIDGE's partner institutions have flagged these courses as needing diaspora expertise. Browse the list below and express interest in teaching a course to start the conversation with the institution.

287
Courses with Gaps
10
Faculties
168
Programmes
Faculty: Engineering and Technology × Clear all filters
Showing 31–40 of 77 courses
BME 526 3 1 institution need this
Engineering and Technology  ·  B.Eng. Biomedical Engineering
Students should be able to: 1. apply the computer to generate a graphical representation of the human body; 2. use the medium of drawing in engineering communications; 3. describe the general principles involved in the u...
View learning outline
Computer Aided Design (CAD): Introduction; basic principles of CAD; CAD hardware and software; the drawing tools; design management; introduction to 3-dimensional (3-D) design; 3D modeling; the printing and plotting process. Design of biomedical systems: Use of CAD in the design of medical equipment. Practical applications - Biomedical applications of CAD: applications in medical imaging; applications in medical diagnosis of various diseases e.g. lung diseases, breast cancer, stroke, sleep disorder, epilepsy, liver cancer, microcalcifications, and artery disease. Minimum Academic Standards Equipment The professional skills necessary to practise biomedical engineering can be acquired first and foremost from the training using institutional facilities designed and equipped to stimulate the practice of the profession. It should, therefore, be adequate in quality and quantity.The number of laboratories each department has will depend on the number of biomedical engineering specialty options offered. As an example: 1. A-one- option department is expected to have one standard multi-specialty workshop and one standard inter-disciplinary laboratory. 2. A two- option department is expected to have one standard multi-specialty workshop and two standard specialty laboratories (reflecting the two options). 3. A three- option department is expected to have one standard multi-specialty workshop and three standard specialty laboratories (reflecting the three options). List of Workshops/Laboratories/Equipment/Instruments/Tools General Biomedical Engineering Workshop 1. Lathe machine; 2. Hand tools; 3. Drilling machine; 4. Hand machine; 5. Grinding machine; 6. Folding machine; 7. Work tables and table vices; 8. Standard toolbox for mechanics, electricians and biomedics; 9. Gas and arc welding machines and accessories, and casting facilities; 10. Saw: hack, radial, circular, panel, rip - blade diametre- 400mm with external blades; 11. Marking gauge; 12. Chisel: dicferent sets; 13. Clamp: C-, F- etc; 14. Extra knives carpentry machine planner and thicknesser; 15. Air compressor – for spraying; tank capacity 500 litres complete with accessories - type spray gun and air blow-gun; 16. Battery: tester, charger and service equipment Bioengineering/Biotechnology Laboratory Bioinstrumentation Unit 1. CFX96 real-time PCR; 2. Protein/nucleic acid electrophoresis system; 3. UV/VIS spectrophotometre with nanovette; 4. Differential scanning calorimetre (DSC); 5. Semi-dry blotting system with power supply; 6. Impedance aAnalyseAnalyser system with PC; 7. Wet blotting system; 8. Molecular imager; 9. Analog/digital multimetre; 10. Signal generator; 11. Multiple input oscilloscopes; and 12. Relevant analysis software and hardware Biorheology Unit 1. Spectrophotometre; 2. Turbid, pH metre; 3. Conductivity metre, colourimetre; 4. Digital rotary, viscometre, thermogravimetric aAnalyseAnalyser; 5. Digital thermometre (-50 - 1000°C) with asphalt needle probe 3 comm long; 6. Ion chromatograph equipment; 7. Solid/liquid extraction unit (complete); 8. Filtration unit with plate and frame filter unit Ffuid bed dryer, digital; 9. Film and dropwise equipment; 10. Fractional distillation column; 11. Laboratory scale spray dryer; 12. Distillation column (computer interfaced distillation column); 13. Water bath; 14. Autoclave; and 15. Centrifuge. Biomedical Informatics Laboratory Digital Unit 1. Digital oscilloscope; 2. Logical circuit EX board A, B; 3. Logic tutor EX board; 4. Basic electrical and electronic application EX board B; 5. Digital system; 6. Project board; and 7. Digital data formatting Computer Networks Unit 1. TCP/IP trainer kit; 2. Licensed software, e.g., OPNET, NS2, assembler, multiSim MATLAB and so on; 3. Networking accessories, e.g., UTP cable, socket, splitter, patch panels, reuters/switches; and 4. Database management software (MySQL) Software Development Unit 1. Sufficient number of desktop computers with appropriately licensed software packages installed in them. Modeling and Simulation Laboratory 1. High-Performance Server 2. Workstations 3. Software licenses-fluent, comsol, etc 4. Routers 5. Switches 6. Servers 7. Large format printer Computer-Aided Design Unit 1. Computation tool on finite elements such as CATIA; NASTRAN; ABAQUS; IDEAS; 2. MATLAB; ANSYS, PDMS; 3. Workstations (at least one (1) workstation to five (5) students); 4. Printer; 5. Multimedia facilities; 6. Most importantly, the laboratory is expected to install software packages such as AutoCAD for drawing and other specialised packages for virtual laboratory. Computer-Aided Manufacture 1. CNC machines (lathe, milling, drilling, etc) Bioprocess Engineering Laboratory Bioinstrumentation Unit Equipment 1. CFX96 real-time PCR; 2. Protein electrophoresis system; 3. UV/VIS spectrophotometre with nanovette; 4. Nucleic acids electrophoresis system; 5. Differential scanning calorimetre (DSC); 6. Wet/semi-dry blotting system with power supply; 7. Impedance Analyseanalyser system with PC; 8. Impedance Analyseanalyser system with PC; 9. CO2 incubator; 10. Molecular imager; 11. Analog/digital voltmetre; 12. Signal generator; 13. Multiple input oscilloscopes; and 14. Relevant analysis software and hardware. Clinical Engineering/Medical Engineering/Dental Engineering Instrumentation Laboratory 1. Control and instrumentation principles(FULL KIT); 2. Analogue andand digital control board; 3. Transducers kit: electromechanical, heat, light, etc; 4. Measurement equipment; 5. Precision Modular Servo Control System; 6. Input/Output Potentiometre Unit; 7. Operational Amplifier Unit; 8. Power supply unit; 9. Function/signal generators; 10. Software upgrade to MATLAB 7.XX; 11. Nl: cable assembly, interface card; 12. PID unit; 13. Wattmetre; 14. Transfer function analyser; 15. Logic probe /pulser; 16. Resistance /capacitance box Control Laboratory 1. Process control simulation apparatus 2. Pressure control apparatus Digital Unit 1. Digital logic analyser 2. Smart logic design experimental kit 3. Digital logic circuit design experiment kit microcomputer trainer 4. AM/FM transmitters and receivers system trainer 5. Programmable logic controller system trainer 6. Analog/digital storage colour display 2/4-channel oscilloscope 7. Arbitrary waveform and Digital Synthesized function Generator 8. Digital spectrum Analyseanalyser (9kHz -3GHz) 9. Instrumentation trainer using transducers complete set 10. Analog/digital communication system trainer 11. Electrical and electronic system trainer 12. Power electronic training system 13. Training kit universal EPROM programmable (48 pins) 14. Bench digital multi-metre digit (various digit ranges) 15. Advanced frequency modulation and demodulation train 16. Decade box: resistance, capacitance, inductance 17. Photo/contact tachometre 18. Portable DC potentiometre 19. PCB Fabrication equipment complete set Fluid Mechanics Unit 1. Manometres 2. Apparatus for hydrostatic forces on plane and curved surfaces 3. Forced vortex apparatus 4. Stability of floating bodies 5. Hydraulic test benches 6. Apparatus for head losses in pipe fittings 7. Apparatus for the flow of fluid around bodies 8. Hydraulic power circuitory and measurement units 9. Centrifugal pump system 10. Calibration and performance of flow measurement devices Neural, Regeneration, and Rehabilitation Engineering Biomechanics Unit 1. Cleve lab virtual instruments 2. Human arm model with angle sensors 3. Gonoimetre(probe + velero straps) 4. Conductivity sensor and dissolved oxygen 5. Respiration rate sensors 6. Bicycle ergometre Tissue and Regeneration Medicine Unit Equipment (Cell Culture Lab) 1. Biosafety (laminar flow hoods) cabinet Type All with stands 2. Incubators 3. Inverted microscopes with digital cameras and PC + cell counting sets 4. Orbital shaker, vortexer, water baths, pH metre, micropipettes, balance 5. Nano ure water system, autoclave liquid N2 storage, microplate reader, and - 80 freezer 6. Protein eectrophoresis system 7. Nucleic acids electrophoresis system 8. Cryotome 9. Lab fluoroscopic imaging microscopes 10. Support equipment employed in cell culture and Analysis Pharmaceutical Engineering 1. Automated biochemical Analyseanalyser 2. Automated cell counter 3. Cell harvesting system 4. Gel electrophoresis instrument 5. Flow cytometry 6. Gas chromatograph mass spectrometre / GC MS instrument PCR Technology 1. DNA thermal cycler / PCR instrument 2. Gradient PCR machine 3. PCR workstation / PCR cabinet 4. PH transmitter 5. Pharmaceutical tablet testing equipment 6. Disintegration tester /disintegration apparatus 7. Dissolution media preparation system 8. Dissolution sampler/issolution sampling system 9. Electrophysiology equipment 10. Portable laboratory equipment/field testing equipment 11. Handheld XRF Analyseanalyser 12. Portable balances. Staffing Academic Staff The NUC guidelines on staff/student ratio of 1:15 for Engineering and Technology departments shall apply. However, there should be a minimum of six full-time equivalent of Staff in the department. There is need to have a reasonable number of Staff with doctoral degrees as well as sufficient industrial experience. With a minimum load of 15 Units per semester for students and a minimum of six full-time equivalent of staff in each programme, staff should have a maximum of 15 contact hours per week for lectures, tutorials, practicals and supervision of projects. NUC requirement encourages all academic staff to have PhD degrees, hence appointment of academic staff is preferably to the Lecturer cadre. Only in exceptional cases are candidates with great promise appointed to Graduate Assistant and Assistant Lecturer positions for the purpose of being developed to the Lecturer cadre as registered PhD candidates. Academic Support Personnel Teaching Assistant/Demonstrators to help lecturers in the conduct of tutorials, practicals and field work. This category of personnel is not expected to be regular staff as they are to be paid on the basis of approved hourly rate. Administrative Support Staff The services of the administrative support staff are indispensable in the proper administration of the departments and faculty offices. It is important to recruit very competent senior staff that are computer literate. Technical Support Personnel The services of technical support staff, which are indispensable in the proper running of laboratories and workshop/studios are required. It is important to recruit very competent senior technical staff to maintain teaching and research equipment. They are also to undergo regular training to keep them abreast of developments in equipment operation and maintenance. The minimum of academic staff to technical staff ratio of 5:1 should be maintained. Minimum Number of Staff Subject to the general standards specified by NUC: 1. there should be a minimum of two PhDs and four M.Eng degree holders full-time academic staff to mount the programme; 2. each workshop or laboratory should have an adequate number of staff with the right mix, such that each unit or section in that workshop or laboratory can run efficiently; and 3. there should be an adequate number of administrative staff of the appropriate calibre for the office of the Head of Department to run. Student/Staff Ratio The minimum staff-to-student ratio should be 1:15 from 200 level to 500 level. Library There should be: 1. a section for biomedical engineering books, journals and other resource materials in the University library; 2. an electronic library section with some online databases relevant to the biomedical engineering degree programme in the University library; 3. a departmental library with books journals, and other resource materials for biomedical engineering. Classrooms, Laboratories,Workshops, Clinics and Offices The NUC recommends the following physical space requirement: Academic m2 Professor’s Office 18.50 Head of Department’s Office 18.50 Tutorial Teaching Staff Space 13.50 Other Teaching Staff Space 7.00 Technical Staff Space 7.00 Science Staff Research Laboratory 16.50 Engineering Staff Research Laboratory 14.50 Seminar Space per student 1.85 Drawing Office Space (A.O. Board) (Per Student) 4.60 Drawing Office Space (A.I. Board) (Per Student) 3.70 Laboratory Space 7.50 Non-Academic Secretarial Space 7.00 Office Facilities S/No Office No in Room Facilities 1. HOD 1 Table, chairs, A/C, filing cabinet, bookshelves, computer unit, Secretary and facilities. 2. Professor 1 Table, chairs, A/C, filing cabinet, bookshelves, computer unit, Secretary and facilities. 3. Reader 1 Table, chairs, A/C, filing cabinet, bookshelves, computer unit. 4. Senior 1 Table, chairs, A/C, filing cabinet, bookshelves, Lecturer computer unit. 5. Lecturer I 2 Table, chairs, fan, filing cabinet, bookshelves. 6. Lecturer II 3 Table, chairs, fan, filing cabinet, bookshelves 1. At least three (3) adequate and dedicated classrooms; 2. Two (2) lecture theatres; 3. Two (2) laboratories and one (1) biomedical engineering workshop; 4. One (1) affiliated hospital clinic; 5. Four (4) senior lecturers’, three (3) other lecturers’, two (2) technologists’, one (1) technician’s, and one (1) administrative offices are the minimum required.
SSG 435 3 1 institution need this
Engineering and Technology  ·  B.Eng. Systems Engineering
At the end of this course, the students should be able to: 1. design linear and non-linear filters and regulators 2. optimize autonomous systems, and 3. decide on optimal solution techniques
View learning outline
Introduction to optimum systems control problems in engineering. Calculus of extrema and single-stage decision processes. State estimation techniques and design of linear filters. Vibrational calculus and continuous optimal control. Design of Linear Quadratic Regulators; the minimum time, minimum fuel, and minimum energy control policies. The maximum principle and Hamilton Jacobi theory. Applied optimum systems control examples.
ICE 412 2 1 institution need this
Engineering and Technology  ·  B.Eng. Information and Communication Engineering
At the end of this course, the students should be able to: 1. demonstrate the knowledge of health and safety at work requirement vis-à-vis installation of electrical and communication infrastructure; 2. explain the regul...
View learning outline
Electrical Installation: Induction to Health and safety at work act in Nigeria. Electrical safety. First aid. Electricity supply regulations. Lighting and Illumination: Luminous intensity and flux. Maintenance factor. Coefficient of utilisation. Types of light sources. Calculation of lighting requirements. Glare. Stroboscopic effect. Installation materials (cables, junction box, terminations, joints). Conduits and conduiting. Truck and trucking. Electrical installation design in domestic, commercial and industrial environment. Alarm and emergency systems. Earthing and Protection. Purposes of earthing. Faraday cage. Rod electrodes. Earth electrode resistance. Earthing system. Earth fault loop impedance. ICT services: NCC and FCC codes of practice and standards. Telecommunication design and installation: Satellite, VSAT, etc. Telephone design and installation. Computer networking design and installation. Wireless LAN design and installation. Preparation of Bill of Engineering Measurement Evaluation. Contract bidding. Consultancy.
ABE 301 2 1 institution need this
Engineering and Technology  ·  B.Eng. Agricultural and Biosystems Engineering
At the end of this course, students will be able to: 1. Explain the theories of failure of machine components; 2. Analyse the loads on machine and structural elements; 3. Apply shear force, bending moment, torsion, bendi...
View learning outline
Design of machine elements: Theories of failure. Design of shafts, belt and pulley drives, gears, sprockets, bolts and nuts, keys and keyways; selection of bearings. Practical session: Use of computer software in machine design. Design of structural elements: Definitions. Hooke’s law. Stress and strain due to loading. Torsion of circular members. Shear force. Bending moment and bending stresses in beams with symmetrical and combined loadings. Stress and strain transformation equations. Mohr cycle. Elastic buckling of columns. Design of beams using empirical methods and computer software. Design of columns using empirical methods and computer software. Group design assignment of machine or structural elements or complete system.
ELE 318 2 1 institution need this
Engineering and Technology  ·  B.Eng. Electronic Engineering
Upon the successful completion of this course, students should be able to: 1. perform base 2, 8, 16 and BCD-code (binary-coded decimal) calculations; 2. design a minimal combinatorial logic circuit that solves binary log...
View learning outline
Introduction to Computing Systems; Switch Design; Boolean Algebra; Gate Design and Simplification; Building Blocks; Number Systems and Arithmetic; Latches and Registers; Counters; State Machines; Memory; Datapaths; Introductory Assembly Programming. Laboratory projects will include use of PC-based CAD environment that supports schematic capture, logic simulation, and HDL-based logic synthesis on FPGAs (field-programmable gate arrays). Small-scale integrated circuits will be used for early labs; HDL-based logic synthesis on FPGA-based design boards will be used for more advanced design implementations. ELE 324 : Communication Principles (3 Units C: LH 45) Learning Outcomes On the successful completion of this course, students will be able to: 1. analyse communication systems in both the time and frequency domains; 2. describe the principles of amplitude modulated and angle modulated communication systems, and be able to analyse their performance in the presence of noise; 3. explain source coding and its relations to information theory, citing Shannon’s theorem; 4. describe the principles of various digital modulation systems and their properties, including bandwidth, channel capacity, transmission over bandlimited channels, inter-symbol interference (ISI), demodulation methods, and error performance in the presence of noise; and 5. explain engineering fundamentals of photogeneration, photodetection and lightwave propagation for optical communications. Course Contents Models of telecommunication system. The concept of information volume. Characteristics of analogue audio and video signals. Analogue modulation techniques and their implementation: amplitude and angle modulation, Frequency Division Multiplexing. Digitization of analogue signals. Binary system. Arithmetic operations on binary numbers. Modulo 2 arithmetic. Pulse code modulation (PCM), sampling, quantization, coding. Delta and differential pulse code modulation. Synchronous and asynchronous, static and dynamic time division multiplexing. Plesio-synchronous digital hierarchy, primary group, secondary group, groups of higher levels. Synchronous digital hierarchy. Multiplexing PDH signals into SDH STM-1 transport module. Transmission media. Optical fibres: single mode, multimode. Optical cables. Wavelength division multiplexing (WDM): Dense wavelength division multiplexing (DWDM) 400 Level GET 402 Engineering Project I (2 Units: C; PH 90) Learning Outcomes At the end of this course, the students should be able to: 1. Complete the design phase of a complex engineering problem sourced from industry or community during the SIWES III programme. 2. Demonstrate the connection between engineering product-making and the theoretical courses they have learned following the applicable industry best practices. Course Contents In the second semester of the 400-level students, preferably in groups, work from the university on the identified industry or organization to tackle industry complex engineering problems. Theoretical issues may be provided by the department faculty or industry experts. During the vacation, students will now work full time with the organisation/industry on the project as part of the SIWES III. The students can also go beyond the department and engage in multidisciplinary undertakings. Literature survey, review of existing systems etc. must be achieved to a satisfactory extent. GET 404 Engineering Valuation and Appraisal (2 Units: C; LH 30) Learning Outcomes At the end of this course, the students should be able to: 1. Identify at least three (3) objectives of engineering valuation work, valuer's primary duty and responsibility and valuation terminologies. 2. Describe at least four (4) Valuer's obligation to his or her client, to other valuers, and to the society. 3. Demonstrate with example the engineering valuation methods, valuation standards, and practices. 4. Prepare engineering valuation and appraisal reports and review 5. Discuss expert witnessing and ethics in valuation. 6. Determine price, cost, value, depreciation and obsolescence in real property, personal property, personal property, machinery and equipment, oil, gas, mines, and quarries valuation.
ABE 505 2 1 institution need this
Engineering and Technology  ·  B.Eng. Agricultural and Biosystems Engineering
This course will enable students know control, tools, programming languages, sensors and actuators involved in automation; design and use of robots and drones in agriculture. Students are expected to be able to: 1. Ident...
View learning outline
Automation: Introduction to automation. Control systems: open-loop and closed-loop, feedback control, logic control, on-off control and linear control systems. Control actions: discrete control (on/off); PID controller; sequential control and logical sequence or system state control; computer control. Automation tools: artificial neural network (ANN); distributed control system (DCS); human machine interface (HMI); robotic process automation (RPA); supervisory control and data acquisition (SCADA); programmable logic controller (PLC); instrumentation; motion control; robotics. Programming languages: introduction to programming language; Matlab programming, R programming, C, C# and C++ programming, Java and Java Script programming and Python programming. Sensors and actuators: introduction to sensors, types and applications. Design and selection of sensors. Introduction to actuators, types and applications. Design and selection of actuators. Drones or Unmanned Aerial Vehicles (UAVs): Introduction, types and classification of drones. Architecture (components) of a drone: flight controller; electronic speed controller (ESC); battery; radio transmitter/receiver; antenna; propellers; electric motor; camera and its accessories.; ground station; intelligent sensors; intelligent battery; GNSS and RTK module. Advantages and disadvantages of drones. Design and selection of drones. Working principles of a drone. Performance considerations criteria of a drone. Application of drones in agriculture. Robots: Introduction, types and characteristics of agricultural robots (Agribot). Primary areas of robotics: operator interface; mobility or locomotion; manipulators and effectors; programming; sensing and perception. Advantages and disadvantages of robots. Robot design process. Design of components of agricultural robots: end effectors; grippers; manipulators. Operating principles of an agricultural robot. Performance evaluation of robots: productive time, overhead time and working efficiency index. Accuracy and repeatability of a robot. Application of robot to agriculture.
TEL 507 2 1 institution need this
Engineering and Technology  ·  B.Eng. Electrical Engineering
At the end of the course, the student should be able to: 1. apply the knowledge of mathematics, and engineering to the analysis of electrical machines and transmission lines; 2. design and conduct experiments, as well as...
View learning outline
Basic single-phase modeling. Three phase system analysis. Three phase models of transmission lines. Three phase models of transformers. Formation of the system admittance matrix. Modeling of Static AC-DC Conversion Plant: Introduction. Rectification, inversion. Communication reactance. DC transmission. Load Flow: Introduction, Basic nodal-method. Conditioning of Y matrix. The case where one voltage is known. Analytical definition of the problem. Newton-Raphson method of solving load flow problem. Techniques that make Newton-Raphson Me Basic single-phase modeling. Three-phase system analysis. Three-phase models of transmission lines. Three-phase models of transformers. Formation of the system admittance matrix. Modeling of Static AC-DC Conversion Plant: Introduction. Rectification, inversion. Communication reactance. DC transmission. Load Flow: Introduction, Basic nodal- method. Conditioning of Y matrix. The case where one voltage is known. Analytical definition of the problem. Newton-Raphson method of solving load flow problem. Techniques that make Newton-Raphson Method competitive in load flow. Characteristics of the Newton-Raphson load flow method. Decoupled Newton load flow method. Fast Decoupled load flow. Convergence criteria and tests. Numerical examples. AC-DC Load Flow: Introduction. Formulation of the problem. DC system model. Solution techniques. Control of converter AC terminal voltage. Extension to multiple and or multi-terminal DC systems. DC convergence tolerance. Test system and results Numerical examples.Optimal operating strategies: Scheduling of generation, types generating stations and their tecno-economic operating characteristics Fault analysis and Control strategy: types of system protection, generators, transformers, lines etc protection schemes switchgear and circuit breakers operating principles and types.
TEL 322 2 1 institution need this
Engineering and Technology  ·  B.Eng. Electrical Engineering
At the end of the course, the student should be able to: 1. recognise the structure and operation of electricity generation, transmission and distribution systems and the impact on the society and environment; 2. solve p...
View learning outline
Generation of electric energy: Sources of energy. Heat value of fuels. Thermal stations. Hydroelectric stations. Nuclear stations. Economics of power supply: Fixed and running charges in electric power production. Load curves and load duration curves including concept of base, intermediate and peak load. Definition of load factor, maximum demand, Diversity factor and their effects on generation. Distribution system: Survey of power system components: feeders, distributors, services mains, radial and ring-man systems. Voltage drop in distribution systems. Per-unit qualities. Overhead transmission system: Conductors and insulators. Transmission line parameters. Resistance, inductance and capacitance. Skin effect. Corona discharge. Stringing: Calculation of sag and tension. Stringing chart and performance. Representation of short and long power lines. Underground cables: Types. Inductance of concentric cables. Capacitance of single-core and three-core cables. Thermal characteristics. Sheath currents. Circuit breakers: Principles of arc-extinction. Types of circuit breakers. Current growth in a purely inductive circuit. Interpretation of circuit breakers lest oscillographs. Current chopping. Resistance and capacitance switching. Breaking and making currents.
TEL 502 2 1 institution need this
Engineering and Technology  ·  B.Eng. Electrical Engineering
At the end of the course the student should be able to: 1. design a complete distribution network for different purposes; 2. apply safety precaution in the design of distribution network; 3. function on multi-disciplinar...
View learning outline
Basic Electrical Installations; Distribution system, regulations - IEE, NEC, Nigeria standards; Illumination, Cables - types, ratings, wirings system, earth protection; Auxilliary electrical systems - fire alarm, telephone, elevator circuits, proposals, contract document preparation; Design of electrical installations - domestic, industrial, commercial air conditioning.
ICE 324 2 1 institution need this
Engineering and Technology  ·  B.Eng. Information and Communication Engineering
At the end of this course, the students should be able to: 1. discuss the introductory digital concepts; 2. differentiate number systems, operations and codes; 3. classify logic gates and compute logic operations with th...
View learning outline
Number Systems and Code. Analysis and design of logic gates of various families: Diodes logic, RTL, TTL, ECL, MOS and MOS of digital integrated circuits. Concepts of small, medium, large, and very large-scale integration and their consequences. Introduction to analysis and design of digital systems. Boolean algebra and mapping methods: Karnaugh and variable entered Maps, combinational logic realization with gates, multiplexers, read only memories (ROMs) and programmable logic arrays (PLAs). State machine analysis and design: state diagram, state flip-flops, input and output forming Logic, State assignments, redundant states, sequential counters, and mainly synchronous systems. State machine realisation with multiplexers, ROMs and PLAs. Asynchronous systems approach to digital systems design, top- down design, trial-and-error methods. Introduction to computer structures: register, transfers, hardware programming methods, Von Neumann machines, and memory systems standard logic functions with MSI circuits: seven segment display drivers, parity generator/checker, encoders, comparators, adders. 400 Level GET 402 Engineering Project I (2 Units: C; PH 90) Learning Outcomes At the end of this course, the students should be able to: 1. Complete the design phase of a complex engineering problem sourced from industry or community during the SIWES III programme. 2. Demonstrate the connection between engineering product-making and the theoretical courses they have learned following the applicable industry best practices. Course Contents In the second semester of the 400-level students, preferably in groups, work from the university on the identified industry or organization to tackle industry complex engineering problems. Theoretical issues may be provided by the department faculty or industry experts. During the vacation, students will now work full time with the organisation/industry on the project as part of the SIWES III. The students can also go beyond the department and engage in multidisciplinary undertakings. Literature survey, review of existing systems etc. must be achieved to a satisfactory extent. GET 404 Engineering Valuation and Appraisal (2 Units: C; LH 30) Learning Outcomes At the end of this course, the students should be able to: 1. Identify at least three (3) objectives of engineering valuation work, valuer's primary duty and responsibility and valuation terminologies. 2. Describe at least four (4) Valuer's obligation to his or her client, to other valuers, and to the society. 3. Demonstrate with example the engineering valuation methods, valuation standards, and practices. 4. Prepare engineering valuation and appraisal reports and review 5. Discuss expert witnessing and ethics in valuation. 6. Determine price, cost, value, depreciation and obsolescence in real property, personal property, personal property, machinery and equipment, oil, gas, mines, and quarries valuation.
0 Total Views

Made Possible Through

Federal Ministry of Education
TETFund