Courses with Gaps
BRIDGE's partner institutions have flagged these courses as needing diaspora expertise. Browse the list below and express interest in teaching a course to start the conversation with the institution.
287
Courses with Gaps
10
Faculties
168
Programmes
Showing 1–10
of 14 courses
BUD 342
2
2 institutions need this
At the end of the course, the students should be able to: 1. explain the processes of water treatment, storage and distribution to end users; 2. carry out hot water and cold-water installation in buildings; 3. calculate...
View learning outline
The course examines the basics of water supply prospecting, treatment, storage and distribution
to communities-Domestic, Industrial and Commercial needs. Hot water equipment and
installation. Calculations for demand, selection of pipes and fittings. Drainage systems, waste
disposal, sanitary systems. Bye law requirements of fire-fighting equipment and installation. Gas
services in buildings. Aspects of internal drainage design, rainwater drainage, subsoil drainage,
external drainage design. Sewage treatment plants.
Acoustics-fundamentals, concepts, hearing and noise acceptability, measurement of acoustic
properties, calculation of noise levels (outdoors and indoors). Principles of noise control, noise
control in practice. Design for noise and hearing. Use of electroacoustic aids.
BUD 378
2
1 institution need this
At the end of this course, the student should be able to: 1. explore local technology options and proffer possible solutions to construction problems.
View learning outline
Technology options for various design solutions. Examination of local technology, intermediate
technology and examination of technology involved in other parts of the world. Construction
methodologies to be explored by the registered Builder for various design solutions are explored.
Hypothetical or real-life project scenarios.
BUD 122
2
1 institution need this
At the end of this course, students should be able to: 1. state statutory and local authority requirements in building construction process; 2. prepare site for construction; 3. identify different types of engineering so...
View learning outline
Statutory and Local Authority requirements. Site preparation: Clearing of bushes, grubbing up
roots, top vegetable soil excavation, reduced soil excavation, reduced level excavation,
dewatering, extermination of termite nests. Types of engineering soils: Importance of soil
investigation. Sequence of building operations. Setting out of a simple building, using builders
square, 3-4-5 Method, and checking the accuracy of setting out.
Classification and properties of building materials, survey of current types of materials and
methods used in building construction, concrete (cement, aggregate, water), timber, plastic and
steel framing systems; masonry construction; interior and exterior finishes. Students are
introduced to preliminary and basic construction processes in the construction of buildings. Types
of foundation (strip, pile, pad and raft), functional requirements of foundations, trenching
excavation and support, types and functional requirements of floors such as solid ground floor
and raised timber ground floors.
BUD 374
2
1 institution need this
At the end of this course, the students should be able to understand the: 1. the laws of agency and torts; 2. the nature of building contracts and contract conditions; 3. the rights and duties of various parties to a con...
View learning outline
A comprehensive study of construction contracts including conditions of agreement and
modifications. The students will also be introduced to related laws of agency and tort.
Nature of building contracts, formation of contracts, construction contracts and rectification,
conditions of contracts: standard conditions of building contracts FMW version (latest edition),
JCT, FIDIC.
Rights, and duties of various parties, interrelationships of the various consultants and the
contractor, relationship between main contractor and nominated sub-contractors, principles of
domestic sub-contracting.
The right to payment at the time of completion, varied work.
Contract types (lump sum, cost plus, PPP); conditions, and disadvantages, standard contract
documents, articles of agreement for building contracts,
general principles of tort, tort affecting land and negligence, nuisance, trespass, strict liability,
liability for animals.
Meaning of arbitration and its contrast with other legal proceedings,
basic ingredients of agreement to submit to arbitration Vis a Vis conditions of contract, Arbitration
decree 1988 (and previous Acts),
Arbitration as it relates to construction industry disputes,
appointment and duties of arbitrator/umpire/referee: multi-door court houses,
arbitration proceedings: procedure prior to hearing.
Hearing – preparation of cases, award, costs/fees, evidences, valuation, point of claim and
defence, other particulars.
BUD 104
2
1 institution need this
At the end of this course, students should be able to: 1. identify and produce Architectural, Civil, Structural and electrical drawings; 2. apply freehand drawing in communication in building processes; 3. develop surfac...
View learning outline
An introduction to and interpretation of architectural, civil, structural, and electrical drawings.
Application of freehand sketches in graphic communication in building for construction details and
sections, manual construction drafting, scaling, lettering, presentation and working drawings,
standard scaling, development of simple surfaces, plotting loci, modelling, ellipse and other
geometrical figures.
BUD 593
2
1 institution need this
At the end of the course, student should be able to: 1. describe information management fundamentals; 2. explain data modelling; 3. describe the concept of BIM and its benefits; 4. carry out the application of BIM in des...
View learning outline
Information Management fundamentals; information management systems. Data flow modelling.
Knowledge management: Definition & properties of knowledge, classification of knowledge, IT
infrastructure for KM. BIM Concepts: Definition; Benefits; 3D Modelling, Virtual
design/construction; surface and solid models; BIM Applications: Design, Construction and
Management phases of projects; BIM Technologies; CAD, Object CAD, Parametric building
modelling; BIM software; Vendors/products (Navis Works, Google Sketch-up, Bentley, Autodesk,
Vico, Tekla), origins and capabilities. BIM and Sustainability; BIM Implementation and Integrated
Project Delivery, Developments in Robotics, Machine Learning and Artificial Intelligence. Students
are required to use the BIM platform to produce the Builder’s documents and all other
documentation produced in the Integrated Studio Work Course.
BUD 594
2
1 institution need this
At the end of the course, students should be able to: 1. understand more areas of application of BIM in design, construction and management of building projects; 2. understand further developments in robotics, machine le...
View learning outline
This course is a continuation of Building Information Modelling and Robotics I. It deals with
construction automation and digital construction. Here students are exposed to the knowledge of
both hardware and software for automation and digital construction. Students are also challenged
to understand or develop software or add-ons for digital constructions including emergent issues
and advances in machine learning and artificial intelligence in construction.
Minimum Academic Standards
Equipment
Wood/Timber Workshop Equipment
1. Woodworking machinery (all-purpose)
2. Wood making hand tools
3. Protective cover equipment
4. Circular saw
5. Drilling machine
6. Lathe machine
7. Electric blower
8. Portable bracing machine
9. Dimension bench
10. Finishers
11. Portable cross out saw
Building Services Workshop Equipment
1. Welding apparatus
2. Electric blower
3. Hand drill
4. Electric heater
5. Soldering kit/apparatus
6. Acetylene regulator
7. Spark lighter
8. Lead pot
9. Sanitary appliances and fittings
10. Water heater
11. Pipe cutter
12. Portable copper tube bending
13. Bench pipe vice
14. Cylinders
15. Forging machine
16. Plumbing and drainage pipe and fittings (assorted)
17. Sets of tool boxes
Instructional modules
While flexibility is allowed in the depth of the body of knowledge in the Building programme it is
essential that all programmes will ensure that students are conversant with the following major
aspects of building:
1. Building Construction Technology/Materials
2. Building Maintenance/Facilities Management
3. Building Services
4. Building Structures
5. Construction Management
Staffing
The personnel requirements for the programmes should reflect student population and the variety
of activities to be performed in the classrooms, studios, laboratories and workshops. The ratios
should conform to the NUC minimum guidelines on staff/student ratio of 1:15 for the programme.
Academic Staff
The point of entry for each of the recognized academic positions should reflect appropriate
academic qualifications, and experience in both teaching and professional practice. Details of the
requirements for the various positions are indicated below:
Academic Support Personnel
Teaching Assistant/Demonstrators are recommended to assist lecturers in the conduct of
tutorials, practicals and fieldwork.
Administrative Support Personnel
The services of the administrative support staff are indispensable in the proper administration of
the departments and faculty offices. These will normally include confidential secretaries, clerical
officers, typists, messengers and cleaners. It is important to recruit very competent senior
personnel who are technology savvy.
Technical Support Personnel
The technical support personnel shall consist of technical officers and technologists. It is
important to recruit very competent senior technical staff to maintain teaching and research
equipment. Considering the technological bias of Building education, availability of adequate
technical staff is crucial. The specialisation of the technical staff may vary depending on the
situation of the particular department. Departments that exist within institutions or faculties
where technical staff from Engineering and Natural and Physical sciences can make input need
not recruit technical staff in all specialisation required in Building programmes. The table below
is a suggestion of staffing levels for technical support in the Building programme.
Appropriate cadre of technical staff should be provided based on the NUC prescribed ratios for
the following areas:
1. Structures/Concrete Laboratory
2. Services Laboratory
3. Technical Drawing Room and Workshops.
Library and Information Resources
In addition to the library resources at the University central library, the programme should be
provided with fully equipped library and information technology centre with minimum of 5
computers, Internet connectivity, 5 reference books, 5 periodicals, 5 Journals for each of the
areas of specialisation in the programme and audio-visual materials. The computers should be
fully connected to the e-library section of the University central library having e-books and e-
journals in all areas of specialisation of the programme.
Classroom, Laboratories, Clinics, Workshops and Offices spaces
For the good administration of each programme, adequate facilities should be provided for the
office of the Dean and for each of the departments. The required minimum standards for each
of the programmes are reflected in the relevant sections for each programme. Spaces will
normally include:
Office Accommodation
1. Classroom Space
2. Studio Space
3. Seminar Rooms
4. Drawing Offices
5. Workshop Spaces
6. Library
In the case of the Office of the Head of Department, office accommodation should be provided
as follows:
Head of Department’s Space
1. Examination Officer
2. Secretary to the Head of Department
3. Administrative Secretariat
4. General Office
5. Conference Room
Space Use (m²)
1. Professors Office Academic 24
2. Head of Department Administration 24
3. Senior Lecturer Academic 20
4. Lecturer Academic 16
5. Assistant Lecturer Academic 12
6. Senior Technical Staff Technical 12
7. Senior Administrative Staff Administration 12
8. Junior Technical Staff Technical 10
9. Junior Administrative Staff Administration 10
10. Studio Space Students 30
11. Lecture Space Students 75
12. Seminar Space Students 30
13. Laboratory Space Students 30
14. Library Students 35
Space Use (m²)
15. Social Space Students 40
16. Storage Space Students 30
Centralized Laboratory and Technical Facilities
Certain laboratories and technical facilities are common to many of the programmes. It is
therefore strongly recommended that such laboratories and facilities be established centrally in
each faculty/college which will include:
1. Computer Laboratory
2. Library/Resource Centre
3. Soil Science Laboratory
4. Materials Laboratory
5. Building Physics Laboratory
6. Reprographics Centre
7. Workshops
Computer Laboratory
The computer lab is a classroom designed to teach about and with computers. The primary
considerations in its design size and location should be; ease of use, security and reliability.
Appropriate hardware and software to meet the general student needs in the environmental
sciences need to be provided.
Equipment:
Listed below are equipment required for the programme:
1. Work stations at the minimum ratio of 1computer to every 4 full time equivalent students with
Autodesk and relevant software programmes.
2. Management Station: a set of control work stations to control access and usage of the work
stations
3. Server(s)
4. Switch
5. UPS systems/power backup
6. Power voltage regulators/stabilizers
7. Air conditioning
8. Internet connectivity
Soil Science Laboratory
The soil science laboratory will normally be equipped to carry out soil sampling and classification
tests, soil analysis and soil moisture, permeability and bearing capacity tests. This range of tests
will normally guide the range and type of equipment required. Listed below is a sample list of
such equipment.
Materials Testing Laboratory
The materials testing lab should be equipped to carry out experiments and tests on a wide range
of materials including concrete, soils, asphalt, bitumen, and aggregates.
Mechanical testing equipment
1. Universal testing machine
2. Impact testing machine
3. Vickers hardness testers
4. Notching machines
5. Hydraulic test pump
6. Extensometer
7. Digital thermometers
Metallographic Testing Equipment
1. Shadowgraph checking machine
2. Metallurgical microscope with image analyser
Chemical Analysis
1. Carbon sulphur determinator
2. Atomic absorption spectrometer
3. Vacuum spectrometer
4. Weighing machines
5. Muffle furnace
6. Glass thermometer
7. Oven
8. Ammeter
9. Pressure gauges
10. Proving rings
Building Physics Laboratory
The building science lab enables multi scale experiments and studies ranging from urban scale to
the micro environment. The range of equipment required include field studies equipment (usually
hand-held) and controlled environment equipment.
Field Studies Equipment
1. Infrared thermometers
2. Environmental data loggers
3. Heist flux sensors/meters
4. Flow meters
5. Tracer gas systems
6. Watt hour meters
7. Thermometers/digital, thermocouple
8. Anemometers
9. Humidity meters
10. Air quality meters
11. Sound meters
12. Portable weather stations
13. Heliodors
Controlled Environment Equipment
1. Sky simulator
2. Boundary layer wind tunnel
3. Controlled environment chamber
Reprographics Centre
1. Heavy duty photocopiers
2. Heavy duty batch scanners
3. DV cameras
4. SLR cameras
5. A3 colour printers
6. A3 scanners
7. Large format (A0) plotters
8. Large format (A0) scanners
Workshops
The following workshop spaces are required. The workshops may also be used for displays of
different materials building systems:
1. Carpentry and joinery/furniture
2. Masonry and concrete work
3. Simple electrical wiring
4. Plumbing and drainage
5. Model making
6. Painting and decorating
7. Mechanical shop and welding
Office Space
Office accommodation for academic, non-academic staff and students per capital should be based
on the guidelines set out in section 4 of this Core Curriculum and Basic Minimum Standards:
Classroom Space
A minimum of two classroom spaces will be required for the undergraduate programme in
building. This provision assumes six hours of contact per day for each year of study.
Studio Space
A studio space is recommended for each year of study above the first year.
Seminar Space
A seminar room/hall is a critical ancillary space and is recommended for each Building programme.
Laboratory Spaces
At least 4 laboratory spaces with adequate capacity for enrolled students at any given time are
required in a department of Building:
Workshop Spaces
The following workshop spaces are required. The workshops may also be used for displays of
different materials building systems:
Carpentry and joinery/furniture
1. Masonry and concrete work
2. Simple electrical wiring
3. Plumbing and drainage
4. Model making
5. Painting and decorating
6. Mechanical shop and welding
7. Drawing office equipment:
T-Squares and drawing tables
Enlargement and reducing machine
Guillotine
Photocopier
Duplicating machine
Slide projector
Scanner
Typewriters
Construction Equipment:
1. Concrete Mixers (1 small and 1 large)
2. Dumper
3. Pokervibrator
4. Crane
5. Rammer
Surveying Equipment
1. Theodolites
2. Quick set levels
3. Chains
4. Tapes
5. Ranging rods
6. Distance measure tapes
7. Total station
8. GPS
B.Sc. / B. Tech. Clothing and Textile Design
BUD 332
2
1 institution need this
At the end of the course, students should be able to: 1. prepare organisational charts for maintenance department and discuss its operations; 2. prepare schedule of dilapidations for buildings; 3. discuss maintainability...
View learning outline
The course deals with the management aspects of building maintenance. Maintenance cycles for
different types of buildings. Standards expected of buildings-deviations, spot items. Planning
maintenance-resources required. Organization of maintenance departments. Building
maintenance problems and their solutions. Foundations, leakages, water proofing, cladding,
among others. Preparation of schedule of conditions and dilapidations. Maintenance audit and
specifications. Statutory requirements for building maintenance, maintainability analysis of
designs, programming, executive appraisal, policy guidelines.
BUD 376
3
1 institution need this
At the end of this course, the students should able to: 1. explain different stages and phases of planning; 2. construction methodology for building works; 3. relate construction methodology to construction programme; an...
View learning outline
Different stages and phases of planning – pre-contract and contract; site organization and site
layout planning; Elements of construction planning; Construction methodology for building
projects; construction sequencing and logic as part of construction methodology; Relationship
between construction methodology and the construction programme; the construction program
as a contract document, a planning, monitoring and control tool for time, budget, costs and other
resources. Time as a deliverable on building projects; detail exposure to construction planning
and programming and use of appropriate software (Microsoft Project/Primavera/Navis Works) for
Builders: operation relationships and precedence; resource levelling, resource scheduling, earned
value analysis. Timing and milestones in programming, progress monitoring and control;
managing (planning, tracking, controlling) resources – time, costs and manpower. using the
construction programme; preparation and submission of the construction programme. In this
course each student is required to prepare a complete construction programme (using Microsoft
Project or Primavera or any other advanced software prescribed by the course lecturer) for a
building project. The student is also required to submit a bound construction programme with
accompanying report in an acceptable professional format.
BUD 322
2
1 institution need this
At the end of the course, students should be able to: 1. discuss roof covering for large span roofs and their processes of construction; 2. discuss ceiling types, materials and processes of construction; 3. explain types...
View learning outline
The course deals with large span roofs: choice, types and classification, functional requirements,
roof covering for large span roofs. Roof lighting: purposes, methods of construction, Materials
used and types. Ceilings: types, methods of construction, materials used and types. Steel
construction: field and shop operations in steel construction, procedures, erection equipment in
field operations. Bolts and rivets: types, materials used, applications and procedures in steel
constructions. Welding: types, materials and processes with equipment, precautions. Shuttering:
materials used and types including detailed sketches of formwork. Joints in buildings: expansion
and construction joints, definitions, nature, purpose and construction techniques and materials
used in joints. Pre-stressed concrete: definition and purpose: methods of producing pressurised
concrete items-pre-tensioning and post-tensioning.