Courses with Gaps
BRIDGE's partner institutions have flagged these courses as needing diaspora expertise. Browse the list below and express interest in teaching a course to start the conversation with the institution.
287
Courses with Gaps
10
Faculties
168
Programmes
Showing 151–160
of 287 courses
ICT 418
2
1 institution need this
At the end of this course, students should be able to: 1. describe health and safety standards in electrical installations; 2. explain NCC and FCC codes of practice and standards in Nigeria; 3. implement telecommunicatio...
View learning outline
Electrical Installation. Introduction to Health and safety at Work Act in Nigeria. Electrical
safety. First aid. Electricity supply regulations. Lighting and Illumination: Luminous intensity
and flux. Maintenance factor. Coefficient of utilisation. Types of light sources. Calculation of
lighting requirements. Glare. Stroboscopic effect. Installation Materials, cables, junction box,
terminations, joints. Conduits and conduiting. Trunks and trunking. Electrical Installation
design in domestic, commercial, and industry. Alarm and emergency systems. Earthling and
Protection. Purposes of earthing. Faraday cage. Rod electrodes. Earth electrode resistance.
Earthing system. Earth fault loop impedance. ICT services: NCC and FCC codes of practice
and standards. Telecommunication design and installation: Satellite, VSAT, etc. Telephone
design and installation. Computer networking design and installation. Wireless LAN design and
installation. Preparation of Bill of Engineering Measurement Evaluation. Contract bidding.
Consultancy.
Lab Work: Demonstration of simple electrical installations using electrical materials including
conduits and trunks. Illustration of ICT installations including wired and wireless computer
networks. Demonstration of telecommunications installations
ICE 412
2
1 institution need this
At the end of this course, the students should be able to: 1. demonstrate the knowledge of health and safety at work requirement vis-à-vis installation of electrical and communication infrastructure; 2. explain the regul...
View learning outline
Electrical Installation: Induction to Health and safety at work act in Nigeria. Electrical safety.
First aid. Electricity supply regulations. Lighting and Illumination: Luminous intensity and flux.
Maintenance factor. Coefficient of utilisation. Types of light sources. Calculation of lighting
requirements. Glare. Stroboscopic effect. Installation materials (cables, junction box,
terminations, joints). Conduits and conduiting. Truck and trucking. Electrical installation design
in domestic, commercial and industrial environment. Alarm and emergency systems. Earthing
and Protection. Purposes of earthing. Faraday cage. Rod electrodes. Earth electrode
resistance. Earthing system. Earth fault loop impedance. ICT services: NCC and FCC codes of
practice and standards. Telecommunication design and installation: Satellite, VSAT, etc.
Telephone design and installation. Computer networking design and installation. Wireless LAN
design and installation. Preparation of Bill of Engineering Measurement Evaluation. Contract
bidding. Consultancy.
ABE 301
2
1 institution need this
At the end of this course, students will be able to: 1. Explain the theories of failure of machine components; 2. Analyse the loads on machine and structural elements; 3. Apply shear force, bending moment, torsion, bendi...
View learning outline
Design of machine elements: Theories of failure. Design of shafts, belt and pulley drives,
gears, sprockets, bolts and nuts, keys and keyways; selection of bearings. Practical session:
Use of computer software in machine design.
Design of structural elements: Definitions. Hooke’s law. Stress and strain due to loading.
Torsion of circular members. Shear force. Bending moment and bending stresses in beams
with symmetrical and combined loadings. Stress and strain transformation equations. Mohr
cycle. Elastic buckling of columns. Design of beams using empirical methods and computer
software. Design of columns using empirical methods and computer software. Group design
assignment of machine or structural elements or complete system.
URP 408
2
1 institution need this
At the end of the course, students shall demonstrate the following competencies: 1. outline the various strategies for development control; 2. identify the laws and regulations guiding development control in the cities a...
View learning outline
The various strategies of development control; the mechanics of control; Laws, Codes,
Regulations and standards; development plans/schemes and their implementation. Planning
applications; consents; appeals; enforcement procedures of arbitration submission. Appointment
of arbitration, rules of evidence. Preparation and publication for awards; Methods of enforcing
and impeaching an award. Reference by order of the court statutory arbitration.
NSC 203
1 Unit(s) (LH 15)
1 institution need this
At the end of this course, the student should be able to: 1. describe the developmental stages of man and influence on individual behaviour; 2. explain the quantitative adjustments that are related to growth and developm...
View learning outline
Human growth and development from conception through childhood and adolescence to old age.
Erikson’s developmental tasks for different stages of life. Theories of Learning. Psychology of
Learning and the nurse. The nature and structure of intelligence. Individual differences.
Environment and behaviour. Determinants of human health behaviour. Attitudes. Psychological
influence on health and illness. Care and coping strategies in illness situations especially for
children, adolescents and the elderly.
ELE 318
2
1 institution need this
Upon the successful completion of this course, students should be able to: 1. perform base 2, 8, 16 and BCD-code (binary-coded decimal) calculations; 2. design a minimal combinatorial logic circuit that solves binary log...
View learning outline
Introduction to Computing Systems; Switch Design; Boolean Algebra; Gate Design and
Simplification; Building Blocks; Number Systems and Arithmetic; Latches and Registers;
Counters; State Machines; Memory; Datapaths; Introductory Assembly Programming.
Laboratory projects will include use of PC-based CAD environment that supports schematic
capture, logic simulation, and HDL-based logic synthesis on FPGAs (field-programmable gate
arrays). Small-scale integrated circuits will be used for early labs; HDL-based logic synthesis
on FPGA-based design boards will be used for more advanced design implementations.
ELE 324 : Communication Principles (3 Units C: LH 45)
Learning Outcomes
On the successful completion of this course, students will be able to:
1. analyse communication systems in both the time and frequency domains;
2. describe the principles of amplitude modulated and angle modulated communication
systems, and be able to analyse their performance in the presence of noise;
3. explain source coding and its relations to information theory, citing Shannon’s
theorem;
4. describe the principles of various digital modulation systems and their properties,
including bandwidth, channel capacity, transmission over bandlimited
channels, inter-symbol interference (ISI), demodulation methods, and error
performance in the presence of noise; and
5. explain engineering fundamentals of photogeneration, photodetection and lightwave
propagation for optical communications.
Course Contents
Models of telecommunication system. The concept of information volume. Characteristics of
analogue audio and video signals. Analogue modulation techniques and their implementation:
amplitude and angle modulation, Frequency Division Multiplexing. Digitization of analogue
signals. Binary system. Arithmetic operations on binary numbers. Modulo 2 arithmetic. Pulse
code modulation (PCM), sampling, quantization, coding. Delta and differential pulse code
modulation. Synchronous and asynchronous, static and dynamic time division multiplexing.
Plesio-synchronous digital hierarchy, primary group, secondary group, groups of higher levels.
Synchronous digital hierarchy. Multiplexing PDH signals into SDH STM-1 transport module.
Transmission media. Optical fibres: single mode, multimode. Optical cables. Wavelength
division multiplexing (WDM): Dense wavelength division multiplexing (DWDM)
400 Level
GET 402 Engineering Project I (2 Units: C; PH 90)
Learning Outcomes
At the end of this course, the students should be able to:
1. Complete the design phase of a complex engineering problem sourced from industry or
community during the SIWES III programme.
2. Demonstrate the connection between engineering product-making and the theoretical
courses they have learned following the applicable industry best practices.
Course Contents
In the second semester of the 400-level students, preferably in groups, work from the
university on the identified industry or organization to tackle industry complex engineering
problems. Theoretical issues may be provided by the department faculty or industry experts.
During the vacation, students will now work full time with the organisation/industry on the
project as part of the SIWES III. The students can also go beyond the department and engage
in multidisciplinary undertakings. Literature survey, review of existing systems etc. must be
achieved to a satisfactory extent.
GET 404 Engineering Valuation and Appraisal (2 Units: C; LH 30)
Learning Outcomes
At the end of this course, the students should be able to:
1. Identify at least three (3) objectives of engineering valuation work, valuer's primary duty
and responsibility and valuation terminologies.
2. Describe at least four (4) Valuer's obligation to his or her client, to other valuers, and to
the society.
3. Demonstrate with example the engineering valuation methods, valuation standards, and
practices.
4. Prepare engineering valuation and appraisal reports and review
5. Discuss expert witnessing and ethics in valuation.
6. Determine price, cost, value, depreciation and obsolescence in real property, personal
property, personal property, machinery and equipment, oil, gas, mines, and quarries
valuation.
ITH 407
2 Unit(s) (LH 30)
1 institution need this
At the end of this course, students should be able to: 1. explain the origins of forensic science; 2. explain the difference between scientific conclusions and legal decision-making; 3. explain the role of digital forens...
View learning outline
Computer devices, Data collection, Evidence Collection, Extraction and preservation of evidence,
Data Recovery, Evidence preservation, verification & authentication, Data Discovery &
Identification, Data Analysis, Computer Forensics Tools, Data Hiding Techniques, Computer
forensics and mobile forensics.
CYB 305
2
1 institution need this
At the end of this course, students should be able to: 1. develop basic knowledge on digital forensic and digital evidence; 2. establish awareness of digital evidence challenges aspects of digital evidence; 3. appraise t...
View learning outline
Introduction to digital forensics, digital evidence, and increasing awareness of digital evidence.
Challenging aspects of digital evidence. Best practices in securing, processing, acquiring,
examining and reporting on digital evidence. Cyber trail and challenging aspects of the cyber
trail. Brief history of computer crime and cybercrime investigation. Cyber auditing. Evolution
of investigative tools. Language of computer crime investigation. The role of computers in
crime, technology and law, jurisdiction, pornography and obscenity, child pornography,
privacy, copyrights and the “theft” of digital intellectual property. The investigative process
and investigative reconstruction, with digital evidence. Examine techniques and tools used by
computer forensics investigations such as acquisition, preservation, recovery, and analysis of
evidence obtained from portable and stationary computer storage devices, personal digital
assistants (PDAs), and cell phones. Current technologies and methods as well as leading edge
techniques with practical based exercises/projects and research opportunities.
Lab work: Practical exercises on how to make use of various techniques and tools for
computer forensics investigations and cyber trail during cybercrime investigations. Practice
cyber auditing skills. Work on applying the best practices in securing, processing, acquiring,
examining and reporting on digital evidence with current technologies and methods in
forensics investigation.
ABE 505
2
1 institution need this
This course will enable students know control, tools, programming languages, sensors and actuators involved in automation; design and use of robots and drones in agriculture. Students are expected to be able to: 1. Ident...
View learning outline
Automation: Introduction to automation. Control systems: open-loop and closed-loop,
feedback control, logic control, on-off control and linear control systems. Control actions:
discrete control (on/off); PID controller; sequential control and logical sequence or system
state control; computer control. Automation tools: artificial neural network (ANN);
distributed control system (DCS); human machine interface (HMI); robotic process
automation (RPA); supervisory control and data acquisition (SCADA); programmable logic
controller (PLC); instrumentation; motion control; robotics. Programming languages:
introduction to programming language; Matlab programming, R programming, C, C# and
C++ programming, Java and Java Script programming and Python programming. Sensors
and actuators: introduction to sensors, types and applications. Design and selection of
sensors. Introduction to actuators, types and applications. Design and selection of actuators.
Drones or Unmanned Aerial Vehicles (UAVs): Introduction, types and classification of
drones. Architecture (components) of a drone: flight controller; electronic speed controller
(ESC); battery; radio transmitter/receiver; antenna; propellers; electric motor; camera and
its accessories.; ground station; intelligent sensors; intelligent battery; GNSS and RTK
module. Advantages and disadvantages of drones. Design and selection of drones. Working
principles of a drone. Performance considerations criteria of a drone. Application of drones
in agriculture.
Robots: Introduction, types and characteristics of agricultural robots (Agribot). Primary
areas of robotics: operator interface; mobility or locomotion; manipulators and effectors;
programming; sensing and perception. Advantages and disadvantages of robots. Robot
design process. Design of components of agricultural robots: end effectors; grippers;
manipulators. Operating principles of an agricultural robot. Performance evaluation of
robots: productive time, overhead time and working efficiency index. Accuracy and
repeatability of a robot. Application of robot to agriculture.
ZOO 806
3
1 institution need this
Intensive studies of the factors affecting the abundance and distribution of animals in tropical terrestrial ecosystems (lowland forests; savanna; deserts and montane systems).
View learning outline
Intensive studies of the factors affecting the abundance and distribution of animals in tropical terrestrial ecosystems (lowland forests; savanna; deserts and montane systems); Community structure; functions and dynamics; Adaptation of animals to different tropical environments and the effect of human activities on tropical ecosystems; Ecology of coastal and tropical inland waters like estuaries; lagoons; rivers; natural and artificial lakes; The inter-relationships of fauna and flora; Man's influences on the aquatic environment