Courses with Gaps
BRIDGE's partner institutions have flagged these courses as needing diaspora expertise. Browse the list below and express interest in teaching a course to start the conversation with the institution.
287
Courses with Gaps
10
Faculties
168
Programmes
Showing 161–170
of 287 courses
HIM 521
2 Unit(s) (LH 30)
1 institution need this
At the end of the course, the students should be able to: 1. define economics of health information; 2. distinctively explain the marketing of health information; 3. explain the theories of national choice and utility ap...
View learning outline
Definition of economics of health information, and marketing of health information, theories of
national choice and utility applied to health information products/ services, demands and uses of
health information products. Cost theory of health information models of value of health
information products: exchange, use and expectation value, supply and demand functions of
health information, marketing mix: price, product, place and promotion as applied to health
information (products/ services), market aggregation and segmentation, consumer behavior.
Health information life cycle development, market research, health information brokerage, writing
proposal, marketing communication, costing and pricing methods.
EDU 607
1 Unit(s)
1 institution need this
Goal: To study the determinants of human development from birth to adolescence with special reference to the effects of heredity and environment on the physical, cognitive, social, moral and emotional development of the...
TEL 507
2
1 institution need this
At the end of the course, the student should be able to: 1. apply the knowledge of mathematics, and engineering to the analysis of electrical machines and transmission lines; 2. design and conduct experiments, as well as...
View learning outline
Basic single-phase modeling. Three phase system analysis. Three phase models of
transmission lines. Three phase models of transformers. Formation of the system admittance
matrix. Modeling of Static AC-DC Conversion Plant: Introduction. Rectification, inversion.
Communication reactance. DC transmission. Load Flow: Introduction, Basic nodal-method.
Conditioning of Y matrix. The case where one voltage is known. Analytical definition of the
problem. Newton-Raphson method of solving load flow problem. Techniques that make
Newton-Raphson Me Basic single-phase modeling. Three-phase system analysis. Three-phase
models of transmission lines. Three-phase models of transformers. Formation of the system
admittance matrix. Modeling of Static AC-DC Conversion Plant: Introduction. Rectification,
inversion. Communication reactance. DC transmission. Load Flow: Introduction, Basic nodal-
method. Conditioning of Y matrix. The case where one voltage is known. Analytical definition
of the problem. Newton-Raphson method of solving load flow problem. Techniques that make
Newton-Raphson Method competitive in load flow. Characteristics of the Newton-Raphson
load flow method. Decoupled Newton load flow method. Fast Decoupled load flow.
Convergence criteria and tests. Numerical examples. AC-DC Load Flow: Introduction.
Formulation of the problem. DC system model. Solution techniques. Control of converter AC
terminal voltage. Extension to multiple and or multi-terminal DC systems. DC convergence
tolerance. Test system and results Numerical examples.Optimal operating strategies:
Scheduling of generation, types generating stations and their tecno-economic operating
characteristics Fault analysis and Control strategy: types of system protection, generators,
transformers, lines etc protection schemes switchgear and circuit breakers operating principles
and types.
TEL 322
2
1 institution need this
At the end of the course, the student should be able to: 1. recognise the structure and operation of electricity generation, transmission and distribution systems and the impact on the society and environment; 2. solve p...
View learning outline
Generation of electric energy: Sources of energy. Heat value of fuels. Thermal stations.
Hydroelectric stations. Nuclear stations.
Economics of power supply: Fixed and running charges in electric power production. Load
curves and load duration curves including concept of base, intermediate and peak load.
Definition of load factor, maximum demand, Diversity factor and their effects on generation.
Distribution system: Survey of power system components: feeders, distributors, services
mains, radial and ring-man systems. Voltage drop in distribution systems. Per-unit qualities.
Overhead transmission system: Conductors and insulators. Transmission line parameters.
Resistance, inductance and capacitance. Skin effect. Corona discharge. Stringing: Calculation
of sag and tension. Stringing chart and performance. Representation of short and long power
lines. Underground cables: Types. Inductance of concentric cables. Capacitance of single-core
and three-core cables. Thermal characteristics. Sheath currents.
Circuit breakers: Principles of arc-extinction. Types of circuit breakers. Current growth in a
purely inductive circuit. Interpretation of circuit breakers lest oscillographs. Current chopping.
Resistance and capacitance switching. Breaking and making currents.
TEL 502
2
1 institution need this
At the end of the course the student should be able to: 1. design a complete distribution network for different purposes; 2. apply safety precaution in the design of distribution network; 3. function on multi-disciplinar...
View learning outline
Basic Electrical Installations; Distribution system, regulations - IEE, NEC, Nigeria standards;
Illumination, Cables - types, ratings, wirings system, earth protection; Auxilliary electrical
systems - fire alarm, telephone, elevator circuits, proposals, contract document preparation;
Design of electrical installations - domestic, industrial, commercial air conditioning.
ICE 324
2
1 institution need this
At the end of this course, the students should be able to: 1. discuss the introductory digital concepts; 2. differentiate number systems, operations and codes; 3. classify logic gates and compute logic operations with th...
View learning outline
Number Systems and Code. Analysis and design of logic gates of various families: Diodes logic,
RTL, TTL, ECL, MOS and MOS of digital integrated circuits. Concepts of small, medium, large,
and very large-scale integration and their consequences. Introduction to analysis and design
of digital systems. Boolean algebra and mapping methods: Karnaugh and variable entered
Maps, combinational logic realization with gates, multiplexers, read only memories (ROMs)
and programmable logic arrays (PLAs). State machine analysis and design: state diagram,
state flip-flops, input and output forming Logic, State assignments, redundant states,
sequential counters, and mainly synchronous systems. State machine realisation with
multiplexers, ROMs and PLAs. Asynchronous systems approach to digital systems design, top-
down design, trial-and-error methods. Introduction to computer structures: register, transfers,
hardware programming methods, Von Neumann machines, and memory systems standard
logic functions with MSI circuits: seven segment display drivers, parity generator/checker,
encoders, comparators, adders.
400 Level
GET 402 Engineering Project I (2 Units: C; PH 90)
Learning Outcomes
At the end of this course, the students should be able to:
1. Complete the design phase of a complex engineering problem sourced from industry or
community during the SIWES III programme.
2. Demonstrate the connection between engineering product-making and the theoretical
courses they have learned following the applicable industry best practices.
Course Contents
In the second semester of the 400-level students, preferably in groups, work from the
university on the identified industry or organization to tackle industry complex engineering
problems. Theoretical issues may be provided by the department faculty or industry experts.
During the vacation, students will now work full time with the organisation/industry on the
project as part of the SIWES III. The students can also go beyond the department and engage
in multidisciplinary undertakings. Literature survey, review of existing systems etc. must be
achieved to a satisfactory extent.
GET 404 Engineering Valuation and Appraisal (2 Units: C; LH 30)
Learning Outcomes
At the end of this course, the students should be able to:
1. Identify at least three (3) objectives of engineering valuation work, valuer's primary duty
and responsibility and valuation terminologies.
2. Describe at least four (4) Valuer's obligation to his or her client, to other valuers, and to
the society.
3. Demonstrate with example the engineering valuation methods, valuation standards, and
practices.
4. Prepare engineering valuation and appraisal reports and review
5. Discuss expert witnessing and ethics in valuation.
6. Determine price, cost, value, depreciation and obsolescence in real property, personal
property, personal property, machinery and equipment, oil, gas, mines, and quarries
valuation.
MTH 101
2
1 institution need this
At the end of the course students should be able to: 1. understand the basic definition of Set, Subset, Union, Intersection, Complements and use of Venn diagrams; 2. solve quadratic equations; 3. solve trigonometric func...
View learning outline
Elementary set theory, subsets, union, intersection, complements, venn diagrams. Real
numbers; integers, rational and irrational numbers, mathematical induction, real sequences
and series, theory of quadratic equations, binomial theorem. Complex numbers; algebra of
complex numbers; the Argand diagram. De-Moivre’s theorem, nth roots of unity. Circular
measure, trigonometric functions of angles of any magnitude, addition and factor formulae.
ELE 513
2
1 institution need this
On the completion of the course, students will be able to: 1. analyse and explain the basic building blocks of embedded systems hardware; 2. identify relevant components and building blocks for embedded solutions; 3. eva...
View learning outline
Introduction to microcomputers and embedded systems: Processor architectures,
microcontrollers used in embedded systems; CPU, memory and input output units;
Interrupts; Introduction to hardware level programming of embedded systems:
Programming in assembler, Programming in C, Development platforms for embedded
software; Introduction to microcomputer interfaces: Digital I/O, Serial I/O, Timers, Analog-
to-digital conversion, Pulse Width Modulation (PWM)
ELE 519 & 529: Final Year Project I & II (5 Units C: LH 15; PH 180)
Learning Outcomes
The student(s) will develop a technology and/or system to solve a known and significant
electronic engineering problem and design and, where possible/practicable, build/produce/
manufacture some relevant new hardware/device(s) representing the solution using the
skills acquired in the programme.
Course Contents
Individual student or group of students’ projects undertaken to deepen knowledge,
strengthen practical experience and encourage creativity, entrepreneurship and
independent/team work (as may be the case). The project ends in a comprehensive written
report of a developed system, and/or product/service and oral presentation/defense before
a panel of assessors one of whom must be external to the University awarding the electronic
engineering degree
Minimum Academic Standards
Equipment
List of Required New Laboratories and Equipment
S/N. Laboratory/Workshop Essential Equipment and Components
1 Basic Electrical Engineering Lab Dual Power Supplies; Digital Multimetre,
(Applied Electricity Laboratory) Various electronic components (ICs, BJTs,
MOSFETs, Diodes, Resistors, Capacitors,
Inductors, etc.). PCs loaded with software
for electronic circuits simulation
2 Electronic and PCB Laboratory PCs with specialised electronic design
software, Oscilloscopes (Digital and
Analogue), Function generators, Analogue
training kits, Digital training kits,
Breadboards. Various electronic components
(ICs, BJTs, MOSFETs, Diodes, Resistors,
Capacitors, Inductors, etc.). PCs loaded with
software for electronic circuits simulation
PCB making machine including: Art Work
Film Maker, Curing Machine (Oven), Dip
Coating Machine, U.V Exposure Unit, Etch
Etching Machine, Chemicals for PCB
Processing
3 Digital Electronic and Dual Power Supplies, Digital multimetre,
Microprocessor Lab Digital IC Testers, Microprocessor kits,
EPROM Programmer/Eraser, Interfacing
cards for Process applications, Micro-
controller kits with PC Interface, Texas
Instruments DSP Kits, Analog Devices DSP,
PCs with simulation softwares (Proteus Pro,
MATLAB + relevant tool boxes)
4 Data Communication Lab Function Generators, Oscilloscopes
(Analogue and Digital Storage), Signal
Generators, Various Analog /Digital Study
and Trainer Kits, Fiber Optic Trainer Kits,
Digital Communication Training kits,
Amplitude Modulation/Demodulation Trainer
Frequency Modulation/Demodulation
Trainer, Pulse Code, Network
analyseanalyser and Spectrum
AnalyseAnalysers, SWR Metre, Power metre,
Optical power metre, Industrial standard
simulation tools such as OPNET, MATLAB for
signal processing.
5 Data Communication and Computer System with latest specifications,
Networking Lab 19” Rack, Port Switch, Windows 2003 Server
or Latest version (10 user License), Red hat
Linux (20 user License), Data Backup utility
Software, Data Communication Trainer
Board, LAN Trainer System, Trainer Boards
to study Frequency Division Multiplexing/
Demultiplexing and Time Division
Multiplexing/ Demultiplexing, Digital
Multimetre, Wireless access points, Wi-Fi
LAN Cards, Network/Bandwidth
management Software (Cybernetra or
Equivalent), Trainer Board to study Working
of MODEM, LAN Cable tester, Crimping tool,
Display Boards of various types of cables and
connectors used in Computer networks,
Online UPS (5 KVA), Network Printer,
Antivirus (10 user License)
Embedded Systems Lab Microcontroller kits, Target board, DSP
Starter kits, Modeling and Simulation
software (MATLAB), PC-Based Oscilloscope,
Linux Single Board computer, FGPA
Evaluation kit, Xilinx Embedded
Development kit
Instrumentation and Control Lab Workstations equipped with LABVIEW and
MATLAB for designing and simulating analog
and digital controllers; transducers and
trainers.
Final Year Project Lab
Staffing
Academic Staff
The NUC guidelines on staff/student ratio of 1:15 for Engineering and Technology
departments shall apply. However, there should be a minimum of six full-time equivalents
of Staff in the department. There is need to have a reasonable number of Staff with doctoral
degrees as well as sufficient industrial experience. With a minimum load of 15 Units per
semester for students and a minimum of six full-time equivalent of staff in each programme,
staff should have a maximum of 15 contact hours per week for lectures, tutorials, practical’s
and supervision of projects.
NUC requirement encourages all academic staff to have PhD degrees; hence appointment
of academic staff is preferably to the Lecturer cadre. Only in exceptional cases are
candidates with great promise appointed to Graduate Assistant and Assistant Lecturer
positions for the purpose of being developed to the Lecturer cadre as registered PhD
candidates.
Academic Support Personnel
Teaching Assistant/Demonstrators to help lecturers in the conduct of tutorials, practical’s
and field work. This category of personnel is not expected to be regular staff as they are to
be paid on the basis of approved hourly rate.
Administrative Support Staff
The services of the administrative support staff are indispensable in the proper
administration of the departments and faculty offices. It is important to recruit very
competent senior staff that are computer literate.
Technical Support Personnel
The services of technical support staff, which are indispensable in the proper running of
laboratories and workshop/studios are required. It is important to recruit very competent
senior technical staff to maintain teaching and research equipment. They are also to
undergo regular training to keep them abreast of developments in equipment operation and
maintenance. The minimum of academic staff to technical staff ratio of 5:1 should be
maintained.
Minimum Number of Staff
Subject to the general standards specified by NUC:
1. there should be a minimum of two PhDs and four M.Eng degree holders full-time academic
staff to mount the programme;
2. each workshop or laboratory should have an adequate number of staff with the right mix,
such that each unit or section in that workshop or laboratory can run efficiently; and
3. there should be an adequate number of administrative staff of the appropriate caliber for
the office of the Head of Department to run.
Student/Staff Ratio
The minimum staff-to-student ratio should be 1:15 from 200 level to 500 level.
Library
In addition to the university and faculty libraries, the programme must have a departmental
library that is well equipped with specialized books and journals in both physical collections
and E-collections (E-Resources) of various types. Various field and research reports of the
programme must also be available in the library for staff, students and researchers.
The library must be connected to subscribe repository of:
1. Institutions (national and international)
2. Open access sources
3. Professional Bodies’ e-learning platforms
4. Relevant international organizations
The library must also have adequate facilities for the following:
1. reading;
2. provisions for lending; and
3. reservation unit for specialized materials.
Classrooms, Laboratories, Workshops, Clinics and Offices
The NUC recommends the following physical space requirement:
Academic m2
Professor’s Office 18.50
Head of Department’s Office 18.50
Tutorial Teaching Staff Space 13.50
Other Teaching Staff Space 7.00
Technical Staff Space 7.00
Science Staff Research Laboratory 16.50
Engineering Staff Research Laboratory 14.50
Seminar Space per student 1.85
Drawing Office Space (A.O. Board) (Per Student) 4.60
Drawing Office Space (A.I. Board) (Per Student) 3.70
Laboratory Space 7.50
Non-Academic
Secretarial Space 7.00
Office Accommodation
The requirements for office accommodation are:
1.13 academic offices on paper
2. 1 professorial type in the department. Size: each of the office is about 13.5 m
S/N Office No in Room Facilities
1. HOD 1 Table, chairs, A/C, filing cabinet, bookshelves, computer
unit, Secretary and facilities.
2. Professor 1 Table, chairs, A/C, filing cabinet, bookshelves, computer
unit, Secretary and facilities.
3. Reader 1 Table, chairs, A/C, filing cabinet, bookshelves, computer
unit.
4. Senior Lecturer 1 Table, chairs, A/C, filing cabinet, bookshelves, computer
unit.
5. Lecturer I 2 Table, chairs, fan, filing cabinet, bookshelves.
6. Lecturer II 3 Table, chairs, fan, filing cabinet, bookshelves.
PHS 303
2 Unit(s) (LH 30)
1 institution need this
At the end of this course, students should be able to: 1. outline general principles (classification, mechanism of action, feedback control) of hormones; 2. describe physiology of growth; 3. define calcium metabolism and...
View learning outline
Endocrine system. Introduction and neuroendocrine relationship. Hypothalamo-pituitary axis,
Endocrine glands, normal, hypo- and hyper-functions. Other hormones of some clinical
importance. Physiologic anatomy of male and female reproductive system. Male and female
sex hormones. Cyclicity of hormone secretion in females. Physiology of contraception. Assisted
fertility techniques.
PHS 303
2 Unit(s) (LH 30)
1 institution need this
At the end of this course, students should be able to: 1. outline general principles (classification, mechanism of action, feedback control) of hormones; 2. describe physiology of growth; 3. define calcium metabolism and...
View learning outline
Endocrine system. Introduction and neuroendocrine relationship. Hypothalamo-pituitary axis,
Endocrine glands, normal, hypo- and hyper-functions. Other hormones of some clinical
importance. Physiologic anatomy of male and female reproductive system. Male and female
sex hormones. Cyclicity of hormone secretion in females. Physiology of contraception. Assisted
fertility techniques.